Our Work / Railings & Handrails

Railings & Handrails

Steel and aluminum handrails, guardrails, stair rails and ramp returns.

All work Mobile & Onsite Trailer Repair Dumpster & Roll-Off Heavy Equipment Aluminum TIG Sanitary Stainless Railings & Handrails Commercial Metals Custom Fabrication Boat & Marine

Tyler kneeling on a rubber running track, welding a black aluminum rail post at a ballfield fence under a clear blue sky. — Railings & Handrails
Ballfield Fence Rail Repair
Problem: Damaged rail sections and posts on a ballfield fence line.
Solution: Cut out the failed sections, fit new aluminum rail and TIG-welded it in place on site.
Middle Tennessee
Aluminum
TIG / GTAW

A ballfield rail joint before repair, the post split open where the horizontal rail meets it. — Railings & Handrails
Ballfield Fence Rail Repair
Problem: Damaged rail sections and posts on a ballfield fence line.
Solution: Cut out the failed sections, fit new aluminum rail and TIG-welded it in place on site.
Middle Tennessee
Aluminum
TIG / GTAW

A long run of black steel handrail along a concrete sidewalk ramp between apartment buildings, welding leads still on the ground. — Railings & Handrails
Commercial ADA Handrail Project
Problem: Roughly 1,151 linear feet of ADA handrail across ramp and stair conditions, including switchbacks and 90-degree ramp turns.
Solution: Fabricated, field painted and installed the full run. Project changes mid-build required redesign and refabrication of several rails, managed as change orders.
Nashville
Carbon steel
MIG / GMAW

A square aluminum handrail post at Henslee Park after repair: the crack above the base plate welded closed, the joint rewelded, concrete walk and grass behind. — Railings & Handrails
Henslee Park Handrail Repair
Problem: An aluminum handrail post at Henslee Park had cracked clean through just above its base plate — on a rail the public uses every day.
Solution: Welded the crack out and rewelded the post-to-plate joint in place, in aluminum, so the rail never left the park.
Dickson
Aluminum
TIG / GTAW

The aluminum handrail post cracked through just above its base plate, before repair. — Railings & Handrails
Henslee Park Handrail Repair
Problem: An aluminum handrail post at Henslee Park had cracked clean through just above its base plate — on a rail the public uses every day.
Solution: Welded the crack out and rewelded the post-to-plate joint in place, in aluminum, so the rail never left the park.
Dickson
Aluminum
TIG / GTAW

Aluminum pipe handrail on posts running the length of a concrete sidewalk beside a road. — Railings & Handrails
Guardrail Posts and Base Plates
Problem: Guardrail and handrail work calling for schedule-40 pipe, pickets, posts and anchored base plates.
Solution: Fabricated in aluminum and installed to the project drawings, TIG-welded, with wedge anchors set to the field conditions.
Franklin
Aluminum
TIG / GTAW

Matching black steel handrails on the concrete front steps of two adjoining townhouses. — Railings & Handrails
Townhouse Step Handrails
Problem: New townhouse entries with concrete steps and no handrails.
Solution: Fabricated and installed matching steel handrails at each entry, anchored to the steps.
Nashville
Carbon steel
MIG / GMAW

Two townhouse entries with bare concrete steps and no handrails, before installation. — Railings & Handrails
Townhouse Step Handrails
Problem: New townhouse entries with concrete steps and no handrails.
Solution: Fabricated and installed matching steel handrails at each entry, anchored to the steps.
Nashville
Carbon steel
MIG / GMAW

Looking down from the new top landing of a rooftop spiral stair: diamond-plate landing, heavy black square guardrail posts, the Nashville neighborhood below. — Railings & Handrails
Rooftop Spiral Stair Removal and Reinstall
Problem: Renovations on a rooftop deck meant the existing steel spiral stair had to come out of the way — and the only route on or off the roof was over the edge by boom lift.
Solution: Disassembled the spiral stair, lifted it off the deck by boom lift, then reassembled and reinstalled it once the renovation work was done, welding the landing and guardrail tie-ins back in place on the deck. Not a fabrication job — a careful take-apart and put-back.
Nashville
Carbon steel
MIG / GMAW

The spiral stair standing on the rooftop deck before it was disassembled and lifted off for the renovation. — Railings & Handrails
Rooftop Spiral Stair Removal and Reinstall
Problem: Renovations on a rooftop deck meant the existing steel spiral stair had to come out of the way — and the only route on or off the roof was over the edge by boom lift.
Solution: Disassembled the spiral stair, lifted it off the deck by boom lift, then reassembled and reinstalled it once the renovation work was done, welding the landing and guardrail tie-ins back in place on the deck. Not a fabrication job — a careful take-apart and put-back.
Nashville
Carbon steel
MIG / GMAW

Need Railings & Handrails Work?

Call or text (931) 698-0038 with photos, the location and rough dimensions.

Call Tyler Request a quote

Call Tyler Text Photos