Set ApartMetal Works
Services / Handrails & Guardrails

Handrails, Guardrails, Stairs & ADA Railings

Steel and aluminum handrails, ADA rails, guardrails, stair rails, posts and base plates — fabricated, installed and repaired.

Railing work is production fabrication and field installation at the same time, and the field is where it goes wrong. Drawings say one thing, the poured slab says another, and the rail has to fit what is actually there.

Set Apart Metal Works has run this at commercial scale — roughly 1,151 linear feet of ADA handrail on a Nashville project covering ramp and stair conditions, switchbacks and 90-degree ramp turns, fabricated, field painted and installed, including redesign and refabrication when the project changed mid-build. That is the part worth knowing: change happens on railing jobs, and it gets managed as change orders rather than absorbed silently or argued about later.

Also repair work — municipal, apartment and residential rails that are loose, bent or corroded, including aluminum park handrail repaired on site for a public works customer.

What Actually Fails

The Problems This Solves

If you recognize your own broken thing in this list, you are in the right place.

Loose posts and base plates

Anchors pulled, grout failed, or the base plate cracked at the weld. The fix depends on which one, and they look identical from six feet away.

Corrosion at the base

Where the post meets concrete is where water sits. Rails often fail there long before anywhere else.

Impact damage

Bent rails and racked panels in car parks, loading areas and apartment stairwells.

Rails that do not fit field conditions

The classic railing problem: fabricated to drawings, delivered to a slab that is out by an inch. Field measurement and modification is part of the job, not a surprise.

What’s Included

Scope of Work


  • Steel and aluminum handrails
  • Guardrails and barrier rails
  • ADA handrail fabrication and installation
  • Ramp rails, returns and stair rails
  • Pickets, infill and panels
  • Base plates, anchored posts and wedge anchors
  • Schedule-40 pipe rail
  • Field repair, replacement and modification
  • Commercial, municipal, apartment and residential work

Not included: Code compliance depends on project documents, field conditions, local requirements and any engineering the project carries. Work is fabricated and installed to applicable project requirements — Set Apart Metal Works does not issue a blanket claim that all railing is ADA- or code-certified, and will not represent an engineered load rating without the engineering behind it.

ProcessesMIG / GMAW · TIG / GTAW for aluminum · Stick / SMAW
MaterialsCarbon steel · Aluminum · Stainless steel
WhereMobile across Middle Tennessee, plus shop work where that suits the job better
QuotingWritten estimates with a defined scope. Photos and dimensions speed it up.
Related Work

Handrails & Guardrails Projects

What failed, and what was done about it.

Railings & Handrails

Ballfield Fence Rail Repair

Problem: Damaged rail sections and posts on a ballfield fence line.

Solution: Cut out the failed sections, fit new rail and welded it in place on site.

  • Middle Tennessee
  • Carbon steel
  • MIG / GMAW
Railings & Handrails

Commercial ADA Handrail Project

Problem: Roughly 1,151 linear feet of ADA handrail across ramp and stair conditions, including switchbacks and 90-degree ramp turns.

Solution: Fabricated, field painted and installed the full run. Project changes mid-build required redesign and refabrication of several rails, managed as change orders.

  • Nashville
  • Carbon steel
  • MIG / GMAW
Railings & Handrails

Guardrail Posts and Base Plates

Problem: Guardrail and handrail work calling for schedule-40 pipe, pickets, posts and anchored base plates.

Solution: Fabricated and installed to the project drawings, with wedge anchors set to the field conditions.

  • Franklin
  • Carbon steel
  • MIG / GMAW

Questions

About Handrails & Guardrails

Will the railing meet ADA requirements?

Railing is fabricated and installed to the requirements the project actually carries — drawings, local requirements, field conditions and any engineering involved. That is a different statement from "ADA certified", which is not something a fabricator can assert on its own, and it will not be claimed here.

Can you repair a rail rather than replace it?

Usually. Loose posts, bent sections, corroded bases and damaged panels are routinely repairable in place, which is far cheaper than a replacement run.

Do you handle painting and finishing?

Field painting has been part of past railing scopes and can be quoted. It is stated explicitly in the estimate rather than assumed either way.

Can you take on a commercial railing package?

Yes. Set Apart Metal Works has delivered a commercial ADA handrail scope of over a thousand linear feet including layout, fabrication, field painting, installation and change management. For larger packages Tyler works with subcontractors as the workload requires.

Need Handrails & Guardrails?

Call or text (931) 698-0038 with photos, the location and rough dimensions. That is the fastest way to get a firm price.

Call TylerText Photos